Metal-Ex iron content reducer

Dry deposits can be removed with a cloth soaked in METAL-EX placed on the surface. METAL-EX dissolves limescale and can be easily washed off after 1 hour of treatment. Not effective on organic deposits. If the spot fades after 5-10 minutes after placing a cloth impregnated with METAL-EX on the surface, it is probably a metal deposit.

Application: 0.3-0.6 liters/10 m3, max. 0.6 liters/10 m3. In the case of family pools, the chemical is poured into the skimmer next to the rotating water heater, or into the water at several points in the pool. Ideal pH value: above 7.5. Store in original packaging, in a cool, dry place, protected from sunlight. The product can also be used in community bathing water, if the concentration of any parameter in the water does not exceed the limit values ​​prescribed in Decree 37/1996 (X.18.) NM. The generated waste water must not be discharged undiluted or directly into the ground water, surface water, or sewer network.



Warning phrases: H290: May be corrosive to metals. H302: Harmful if swallowed. H318: Causes serious eye damage.

Precautionary regulations:

P234 Keep in original container

After using P264, hands should be washed thoroughly.

P280 The use of protective gloves/protective clothing/eye protection/face protection is mandatory.

P301+P312 IF SWALLOWED: call a POISON CENTER / doctor if you feel unwell.

P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. If applicable, removing contact lenses, if it can be easily solved. Continue rinsing.

P390 Soak up spilled material to prevent damage to surrounding materials.

P406 Store in acid-resistant/acid-resistant lined container.



Content: Hydroxyethylene-1,1-diphosphonic acid 35%