Pontaqua Hot Splash heat pump 3,75 kW

• For pools smaller than 12 m³
• Noise less than 50 db
• 3.75 kW heating power
• 6 COP (25-25)
• suitable for laryngeal tube connection
• 15 kg weight
• ultra-compact, ultra-quiet
• With 10 mA FI relay
• environmentally friendly R32 gas charge
• size: 290 x 310 x 370 mm

Min. operating temperature (°C) 10
Heating power A: 27 °C / W: 26 °C * (kW) 3.35
Heating power A: 15 °C / W: 26 °C (kW) 2.65
Power (kW) 3.75
COP at A25 / W25 (C.O.P) 6
COP at A15 / W25 (C.O.P) 5.1
Maximum pool size (m³) 12
Current strength (A) 2.55
Maximum current (A) 3
Power supply (V / f / Hz) 230v/1/50hz
Air flow (m³ / h) 700
Fan direction Horizontal
Noise at 10 m (dB (A)) 50
Refrigerant R32
Refrigerant weight (kg) 0.24
Capacitor Titanium
Water connection (mm) 32
Nominal water flow (m³ / h) 2
Delivery dimensions (mm) 310/360/385
Unit net dimensions (mm) 290/310/370
Net / delivery weight (kg) 15

Recommended professional connection:

In order for the Pontaqua Hot Splash heat pump to be able to heat the pool cost-effectively and with adequate performance, and to keep the pool water at the desired temperature, we recommend the following connection method.
Connect the heat pump to the bypass branch, after the filtration, before the blower. It is best to branch it off with a 45-degree T-Connector, and back with the same one, wired as intended.
It is also necessary to build a non-return valve in the bypass branch so that the stronger filter-water circulation pump does not suck the water back through the heat pump.
Due to possible dismantling, it is also worth installing the usual 2 ball valves.
Important!

The heat pump can only properly heat and maintain the pool water at a temperature if a pump circulates the water. The constant operation of a high-performance pump is not cost-effective, we use a lot of energy unnecessarily. With a smaller additional pump, energy costs can be kept low, and the heat pump can also provide maximum performance.